Popcorn ceiling, also known as stucco ceilings, textured ceiling, or cottage cheese ceiling, is a type of ceiling that has a certain paint-on or spray-on treatment. The materials used for popcorn ceiling include styrofoam or stucco, which gives them a bumpy appearance similar to popcorn and hence the name. We’ve listed a few pros and cons of popcorn ceilings below.
1) Hide Imperfections
The bumpy appearance of the popcorn ceiling makes it perfect for camouflaging any imperfections. This is possible since its texture on walls creates small shadows that darken the shade of the surface when there is light. The darkening effects help to better mask a multitude of imperfections such as cracks, leaks, damage, poor drywall artistry, and others.
Popcorn ceilings are a more affordable option than painting and can effortlessly be installed. You can easily find a contractor to do it or even do it yourself if you’re used to painting as it is a sprayed-on textured installment.
3) Noise Dampening
Popcorn ceilings offer noise insulation qualities due to its increased surface area. Noise reduction is possible as the thick textured raised bumps help in absorbing sounds. This can be especially helpful in rooms where noise is an issue such as high-traffic entryways or hallways, rooms that echo due to high ceilings, or a great advantage to grab your midnight snack without causing much noise! The thicker and more porous the texture, the better it will be at muffling sounds.
1) Difficult to repair
Repairing popcorn ceilings can be hard. If there’s a leak, crack, or other ceiling damage, the destroyed part will need to be cut out replaced by a perfectly matched color and texture, which can be extremely difficult to achieve. In many cases, the recurrence of the issue is most likely to happen. If you want a uniform and perfectly repaired ceiling, unfortunately, the entire ceiling will need to be redone from scratch.
2) Difficult to clean
The bumpy surface of the popcorn ceiling makes it hard to clean as dust, cobwebs, spiders, and other little insects attach to it quickly. A brush head or vacuum cleaner might help to get rid of dirt, but constant cleaning using such devices can also break the popcorn ceiling, resulting in more harm than good. Dirt in between the crevices is too hard to reach and clean. Moreover, smoke can also stain the popcorn ceiling.
Are you considering popcorn ceilings for your home?
Whether you’re trying to revive a dull and stained ceiling or simply enhance a room, painting the ceiling is often a tiring and messy task. Luckily, we’ve gathered a few tips for you to have a smooth ceiling painting project!
1) Use a Paint-Roller
Using equipment like a paint sprayer might indeed be easier to paint the ceiling. However, if you’re all about quality, you can’t go wrong with a paint-roller! Not only is a paint-roller affordable, but they can also provide you with better coverage. A good paint sprayer costs a lot more than a decent paint-roller, which is also easier to find. Moreover, by the time you finally manage to set up the paint sprayer and complete the pre-painting prep, you could have completed the ceiling paint with a paint-roller. From over-spraying to frequent clogs, you’ll also face unpleasant outcomes if you haven’t been maintaining the paint sprayer. Using a paint-roller causes less splatter than paint sprayers. It also provides a better color consistency through a thicker paint layer, which makes the finished product beautiful and spotless. Paint sprayers also come with a lot of wastage when the atomized paint drifts away, whereas each drop of paint is used with paint-rollers.
2) Use an Extension Pole
With the added leverage, extension poles enable you to paint faster. It lowers the amount of physical labor required to paint ceilings. For instance, you won’t have to bend down to low areas or get off the ladder constantly to reload the roller with paint. It also becomes easier to reach the ceilings without extending movements of the body, which can cause problems like backache.
3) Use a White Ceiling Paint
Opting for white ceiling paint is certainly not a mistake. It will never go out of style and has many more advantages than choosing vibrant colors. A white ceiling will brighten up any room and make it look clean and neat. It will also make rooms appear bigger since white paint gives an illusion of additional height to ceilings. Additionally, you won’t have to worry about clashing colors since white goes with anything, giving you the freedom to choose any other color for the remaining walls in the room.
Have these tips been helpful to you? What are other useful tips you know to paint the ceiling? Share it with us in the comments below!
Stairs, indoor or outdoor, are an essential aspect of any home, office environment, or place of work. Stairs provide access to different levels of a building and serve as a safe means of passage between floors. Stairs are also commonly used as emergency exits and fire escapes.
Although stairs allow us to access different areas of a building easily, they can also pose a potential safety hazard. Individuals with back problems or walking difficulties could find it hard to climb a set of stairs without injuring themselves. Furthermore, poorly designed stairs with inadequate safety features could be dangerous to use. Most stairs installed in a home or an office do meet minimum safety requirements but may not have advanced features that will prevent accidents.
If you want to ensure your stairs are infinitely safe, why not consider some of the below safety features that are easy to implement?
By adding secure handrails or banisters
most common way to make stairs safer is to add railings on both sides
of the staircase. This will provide something to hold on to while
climbing up and down the stairs. A staircase without a handrail or
banister can be a huge safety concern. For those who lack stability
on their feet, or find it difficult to walk downstairs, a handrail is
an absolute necessity. A handrail or banister provides something an
individual can hold onto for balance and safety when walking
A handrail can easily be installed, and aside from the improved safety, it can also make a staircase look aesthetically pleasing. Handrails can be simply screwed into the staircase wall, or, if the stairs are open, you can consider a banister complete with vertical rails. This simple safety measure will ensure that anyone using the staircase has an anchor point to hold onto.
By adding LED lighting
stairs are enclosed, they can often appear dark. Furthermore, if a
dark shade of material is used for the actual stairs, people with
poor sight may struggle to see each step. Poorly lit stairs can lead
to people missing their footing or stumbling down a staircase.
A simple solution that can make a staircase more visible is to add LED lighting. LED light strips provide a fantastic source of light, and they can be combined with little effort to a staircase. A common best practice is to attach LED strips underneath the lip of each stair – this provides simple illumination and can make a huge difference to the visibility of the stairs. Furthermore, if a pale color is chosen, such as white or golden yellow, your stairs can be transformed into a beautifully lit walkway.
By adding traction mats
are often made from smooth surfaces such as wood that are slippery. A
carpeted stair will provide a significant amount of traction, while a
wooden stair will not. It only takes someone to slip on uncarpeted
stairs, causing injury and serving as a real danger hazard.
Traction mats can provide additional grip on a staircase and can significantly improve a person’s traction. This type of tread is usually made from rubber or other rough materials that have a high degree of resistance. This functional device can be installed for a minimum cost and could potentially save businesses thousands in accident claims.
By implementing a contrasting color scheme
A staircase will often feature a single color scheme – each stair will be painted with the same color. This is perfectly fine from a design point of view, but it can cause a potential safety hazard. A mono-color staircase can make each stair hard to identify. To rectify this, you could consider using a contrasting color scheme – why not paint your stairs in alternative colors, so each separate stair is noticeable?
Keep hazards out of your way
Always make sure no objects are present on the stairs. No matter how small an object might be, it is a trippy hazard that increases the risks of falls.
Similar to when you drive, pay attention to each of your steps up or down the stairs. Avoid texting, emailing, or searching on your smartphone. A trivial distraction such as checking on your social media notification might cost you a fall. Avoid carrying anything which encroaches on your line of vision, or which prevents you from holding on the handrail.
Adding a stairlift is another way of making a set of stairs safer. Stairlifts can be installed on both curved and straight staircases. Often installed for seniors that have limited mobility, they can easily move from one story to another.
you can see, improving the safety of a staircase is not complicated.
All it takes is a little planning and consideration. Review
the safety of your staircases today and see if you would benefit from
want to purchase a steam cleaner, but you have no idea of its
performance and other criteria to consider before buying one. In this
post, we tell you everything you need to know about a steam cleaner
to help you make a wise choice.
on the Basic Details:
steam flow rate (g/min): it is better to choose an adjustable flow
(bar): from 4 bar;
(Watt): the more powerful the steam cleaner is, and the faster the
water heats up, the more energy-intensive it is;
construction material of the tank: privilege stainless steel; the
capacity of the tank: from 0.50 liters to 2 liters;
heating time: as short as possible; autonomy: from 10 to 50 minutes
(dB): check with a seller or manufacturer;
consumption: depends on the power of the resistors;
make sure that the cap cannot open if there is still pressure
sufficiently long cables and hoses, presence of straps, excellent
quality castors, and a not too heavy assembly.
Cleaner Flow Rate
The steam flow rate represents the speed at which steam passes through the cleaner to reach the substrate to be cleaned. The steam flow rate is measured in g/min. The higher the steam flow rate, the more efficient the unit is.
If you are projecting steam on fragile ground, the flow rate shouldn’t be too high, as this may damage the floor. It is preferable to choose a steam cleaner with an adjustable flow rate.
The steam flow rate varies from 0 to 115 g/min. If you want to clean carpets and hard floors, do not hesitate to consider a flow rate starting at 70 g/min.
Manufacturers are not required to provide this information. It is,
therefore, only found on certain models.
The pressure of a steam cleaner represents the force exerted by the steam projected to remove dirt. This pressure is measured in bar: The pressure can vary from 3 to 6 bar. For a steam cleaner to be effective, it must have a pressure of at least 4 bars.
If it is a small steam cleaner, a pressure of 3.5 bars does not affect the quality of the cleaning. The more pressure you apply, the faster you will see the dirt disappear without effort.
The lifespan of a Steam Cleaner
The lifetime of a steam cleaner depends on the volume of the tank, of the battery (if the device is wireless), auto-filling, which consists of continuously replenishing the steam cleaner with water, the heating time of the tank.
Water requirements differ according to the surface to be cleaned:
For a small apartment: 0.50 to 0.75 liters.
For a house: up to 2 liters or unlimited.
Some steam cleaner models operate wirelessly, powered by a battery. It is interesting to know how long the device can be used before it is discharged. On average, you can operate wireless steam cleaners for 20 minutes, the lowest for 10 minutes, and the most efficient for 40 minutes. Note: the battery life decreases as the device ages.
Unlimited Operating Time: Auto-Filling
The most sophisticated models incorporate an auto-fill system that consists of continuously replenishing the steam cleaner with water. This way, you no longer have to interrupt your cleaning.
Water Heating Time
heating time refers to the time during which the resistors convert
water into steam, i.e., at 120 °C. In general, heating time does not
exceed ten minutes. A conventional steam cleaner with a resistance of
1,500 watts will take about ten minutes to convert water into steam.
On the other hand, if the model is equipped with a 2,000-watt
resistor, the water will heat twice as fast.
to Know: Be
aware that the more powerful the resistances are, the more
energy-consuming the steam cleaner is.
Tank Materials and Options
Here are the points to watch out for when choosing the tank:
– To extend the life of your device, choose a stainless steel tank.
– If the water in your area is hard, use a scale remover or an integrated descaling system.
– Another thing to watch out for is the sound insulation of the tank. The noise emitted by the device comes from its ability to muffle it in the tank. Some models are equipped with a noise reduction pump.
Number of Decibels Issued
Like any electrical appliance, a steam cleaner makes noise. The projection of steam on a surface can cause an unpleasant whistling sound. The noise emitted by the cleaner is expressed in decibels. The display of the number of decibels is not mandatory.
Good to Know: so don’t hesitate to ask a seller for information: a difference of three decibels can result in a sound volume twice as high.
Energy Consumption of a Steam Cleaner
a steam cleaner is considered environmentally friendly, in the sense
that it requires very little water and no detergent, it still has
resistors that heat the water in the tank. The energy consumption of
these resistors may vary, and the display of the energy class is not
mandatory. It is therefore highly recommended that you contact the
manufacturer or dealer to find out more about this information.
is essential to have a good grip on the device: the handle must be
soft to the touch, the cables and hoses long enough, the castors of
good quality and the equipment must not be too heavy. Indeed, a steam
cleaner must be light enough to be lifted on stairs or to reach an
object at a height. The small models are equipped with a strap so
that they can be suspended on the shoulder. The weight of the device
is an essential element in the choice, especially for the most
massive steam cleaner tanks that can reach 10 kg.
the above criteria help you out in choosing your steam cleaner.
Discover more through our posts on homemy.info!
From helping you to improve your home, there is a plethora of
articles to read and apply in your daily life. Remember to share your
comments in the section below.
For most of us, a house is not a short term investment that
we can just sell or discard after a few years. It is both a financial and
emotional investment that we make when purchasing a house. And it is an
investment we intend to hold on to for the longest time possible.
While we hope that the structure we spend our lives in will
stand the test of time, there are still adjustments and changes that will have
to be made along the way. These changes will range from minor to major but will
usually not involve tearing down the whole thing and rebuilding from scratch.
And for that to happen, we need to ensure that every step of the building
process is well thought out.
So, when looking at long-lasting options, remember that
durability and timelessness also apply to furniture. If it’s durable furniture
that you seek, there’s no better choice than custom-made. While custom wood
furniture sounds expensive, do not settle for furniture that lacks uniqueness
because the extra money is well worth the investment.
Never considered custom-made furniture? Well, we’ve prepared a list of 6 reasons detailing why custom-made far outweighs the cost-saving that comes with prefabricated furniture.
6 Reasons for getting Custom Furniture
1. Quality that Doesn’t Deteriorate
The level of attention brought to a custom furniture is
different from that brought to the manufacturing of mass-produced furniture.
This explains why custom-made wood furniture items are of higher quality, have
a better quality finish and are durable. And when we talk of quality, we are
not only talking about the basic construction. The team of craftsmen involved
in the project will be meticulous about every aspect of the product, from the
type of wood to the fabric, glue and stuffing.
Because of the greater attention to detail and build in
custom furniture, custom furniture items tend to last longer. Even if they are
pricier, custom wood furniture pieces are built to last and hence retain
quality and value well.
2. Infinite Options and Better-Fitting Furniture
If you ask us, the most compelling reason to buy a custom-made piece is hands down the range of options available to you. Custom-made furniture outperforms ready-made items by leaps and bounds when it comes to this. From mahogany to teak and sustainable wood, the options for custom furniture are infinite. The designs are really only limited to what you can dream up! If your furniture is tailor-made, you will have greater utilization of space. Unlike prefabricated furniture that has fixed dimensions, custom wood furniture can be customized so the pieces suit your space perfectly.
3. Increased Flexibility When It Comes to Design
When it comes to tailor-made, you are the captain of this
ship. From cosmetic options to colours, finish and hardware, you can customize
Not only do makers care about every aspect of the quality of
their product, but they will also provide increased design flexibility by being
as accommodating as they can. They will ensure that they understand your vision
and interpret your designs before carefully build a timeless piece of
4. You Get to Pick the Best Materials
Unlike with off-the-shelf items, custom made furniture is made specifically for you and to suit your tastes. You, therefore, have the freedom of choosing the material you want and the material you believe to be of better quality. For example, you get to choose from sustainable wood, such as oak, to lighter wood, like beech.
5. Your Furniture Items Will Look Amazing and Will Be Unique
Since you pick the design, you get to choose a piece of furniture
that has phenomenal aesthetic quality and that will match the style of your
home. Custom furniture brings a level of elegance to a décor that prefabricated
box store items don’t.
With custom wood furniture, you will have the freedom of expressing your unique style. From shape and fabric to colour and trim, every detail is according to your specifications. Since you will have full control of the design, the furniture pieces will blend seamlessly with your décor.
6. Increases the Value of Your Home
One of the best reasons for getting furniture made-to-order
furniture is the value it adds to your home. Bespoke items are unique and
original and in some cases, can even be called works of art.
The level of artistry and hard work that the piece reflects can add value to your home and is worth the investment. Additionally, this type of furniture promises quality and stylistic timelessness and can, therefore, stay in the family for years, even generations, to come.
The choice of glazing for your windows is essential both for their level of insulation (double glazing) and for their resistance (reinforced glass), their style (colored glass) and the privacy of the home (opaque glass). In his post, Homemyinfo will guide you in the choice of the most suitable glazing for your windows.
It is above all the geographical location of your home, the orientation of your room and the noise level that determines the type of glazing best suited to your future windows.
Choose the Right Window Glazing
The number of windows is an essential point for sound and thermal insulation. Single glazing is almost no longer installed due to its poor performance but can be supplemented with over-glazing to improve its qualities.
Today, double glazing offers the best sound and thermal insulation for standard or custom-made windows. Let’s discover its technical qualities below.
You can go even further by opting for triple glazing, especially used in low-noise houses with reinforced insulation.
Select the Right Glass
There are many types of glass for you to choose from and each has its own technical qualities.
You should look for the SGCC certification label when selecting quality glazing. They are an independent quality assessor that guarantees the resistance and safety level of insulating, laminated and tempered glass.
Resistance and Safety
Your windows are on the ground floor and you want a glass that will limit the risk of burglary? You can choose laminated or tempered glass that offers increased impact resistance. Another option is reinforced glass, which does not prevent glass breakage, but prevents the passage of a thief thanks to its grid.
Some glasses can either be colored or rendered opaque for more privacy inside your home. Be careful, however, they must not prevent light from entering. Below, we’ll look at some of the solutions.
Less common and often more expensive, new intelligent lenses are appearing on the market. Self-cleaning, opaque, electrochromic, with integrated blind: 2 in 1 glazing, heated glazing, etc., they use new technologies to make your windows more convenient and energy-efficient.
Self-Cleaning Glass: Maintenance-Free Glazing!
Self-cleaning glass is glass with a special coating that keeps it clean and maintenance-free! The self-cleaning glass combines photocatalysis and hydrophilicity in the following ways:
The photocatalysis process: the outer surface of the glass reacts to ultraviolet rays and degrades organic dirt (dust, pollution…) that comes off the glass.
The hydrophilic property: the glass allows rainwater to flow along the glass, carrying with it dirt and leaving no trace.
This process works even without sunlight; daylight is sufficient to activate the degradation of dirt. This glass is especially useful on fixed windows that are difficult to access.
Note: it should not be forgotten that the inside of the glass is not covered with this special coating and should, therefore, be cleaned normally.
Opacifying Glass: Controlled Opacifying Glass
Opacifying glazing makes it possible to eliminate an annoying counterpart at the touch of a button. This type of glazing consists of a liquid crystal film inserted between the panes of double glazing, in the same way as laminated glass.
This glazing incorporates an electrical connection that allows it to be opaque at will:
In the “off” position (not electrically powered), it offers a translucent, milky appearance, which hides the view while maintaining good brightness.
In the “on” position (electrically powered), the glass becomes transparent like a conventional glass. The change is fast and reversible at will.
This is also opaque glazing through which an electric current flows. This type of glazing offers the advantage of being able to choose the degree of brightness or opacity at will.
In addition, it consumes little energy thanks to a memory effect that allows it to remain in the desired state even when power is off. It therefore only consumes electricity when the state changes.
It is already used on some car windows and extends to the home, but remains very expensive to implement.
Blind Glazing: 2 in 1 Glazing
Integrated blind glazing is double glazing in which a permanent or remote-controlled Venetian blind is inserted: hinged or tilting slats.
glazing is suitable for all types of walls (inclined or straight) and
offers many advantages:
the thermal and acoustic performance of double glazing;
control of brightness and sun protection thanks to blinds;
no maintenance required for the awning;
adaptable to all joineries.
Glazing: The End of Radiators?
Heated glazing is double glazing composed of a conductive layer connected to the power supply by electrodes.
electrical energy is then transformed into heat and diffused by
more cold wall effect that encourages you to increase heating;
replace or supplement an existing heating system;
condensation on the inner glass and therefore reduces the risk of
saving compared to radiators.
glazing remains expensive like all the innovations hardly proposed on
the market, but perhaps represents the future of heating!
all, this post should interest people seeking some information on
window glazing. So, you will have more elements to discuss with your
contractor next time you are planning a home renovation or
Oh, summer, the sweet sun and endless time spent in the pool! Well, that’s how most of us prefer summer. Chilled beer and unlimited soaking time in the pool is what Australian summer is all about. It is known that your swimming pool needs a regular check-up to be at its best. This is why it pays to develop a strong basic understanding of pool maintenance essentials. Here is everything that you need to know about swimming pool services. They are the doctors of your pool and the saviours to your summer water feast! So before you end up employing a service, however, there tend to be a number of elements an individual must keep in mind.
pool owners go for a do it yourself system in pool care, but some
find it worth it to employ another person. Knowing what services the
pool company supplies is definitely vital in determining just how to
deal with the servicing connected with your swimming pool.
majority of swimming pool companies provide similar servicing duties,
many on a weekly time frame. Several of these types of tasks may well
include things like retaining the pool’s appearance by scrubbing up
walls and steps and skimming trash off of the water’s surface,
maintaining equipment in operating order and balancing the chemical
compounds throughout the pool. Some services also provide swimming
pool installation. You should take a look at whether your pool
installers perform swimming pool services also since if they do, this
is the most exceptional quality service an individual can find. This
individuals already know your pool, and consequently, these people
understand how to take care of it in the highest possible way.
if perhaps you do not keep your pool available year-round, a pool
service can certainly also open and close your pool for an added
cost. Opening a pool involves the removing of the cover, a chlorine
treatment, re-installing the pump and filter, as well as the ladders
and diving board. Shutting down the pool calls for draining the
water, cleaning the water out of the water pump, taking off the
ladder and diving board and ultimately covering the pool.
companies provide primary services for close to $145 a month with
swimming pool openings and closings from $100 to $150 each time, yet
a few swimming pool owners quote up to $400 for monthly services. The
price of pool services is remarkably variable, with numerous adding
elements. Here are some questions to ask yourself when determining
how large is your swimming pool? The size of your pool impacts just
how many gallons of water have got to be treated with chemicals as
well as just how long the swimming pool guys will have to brush off
walls and steps, therefore when you currently have a big swimming
pool; you might be charged more for chemicals and working hours.
what exactly are the usage and circumstances of your swimming pool?
Elements like the consistency of utilization along with just how much
trash falls into your swimming pool may signify more or fewer
appointments from your swimming pool service in a month.
where do you reside? The location in which you live can have a
significant impact on the cost of pool maintenance. Many swimming
pool providers in your region can produce more aggressive costs. Fuel
and chemical costs furthermore influence service prices, because the
pool provider may factor that straight into their fee.
what type of equipment does your swimming pool have? Swimming pools
have distinct filter systems, skimmers and vacuum cleaners that
influence the consistency of servicing the pool will require. Excess
equipment, including heaters and lights, may suggest more repair
phone calls to the service.
consider for hiring?
the incorrect service can be an expensive oversight. Though there
tend to be quite a few excellent providers out there, swimming pool
maintenance can be a transient business. In advance of choosing, be
positive that the service is covered by insurance and knowledgeable.
How long has the company been around? Are they a part of an honest
business association? Do a little investigation before hiring.
the provider is also essential to be sure that they have competent
employees. Are these people knowledgeable with regards to your pool’s
equipment? If you have a heated pool, does the provider understand
how to repair the heater if it breaks? Do they know the critical
maintenance of your specific filtration system? All these are
concerns to think.
it is essential to look around. Assess fees and services of different
providers. Consult neighbours asking what provider they employ.
Choosing to retain the services of a company can take away the burden
of taking care of the overall health of your pool, but hiring the
inappropriate one can turn out to be even far more of a problem.
Consider all of the specifics and make your decision properly.
If you are looking for a provider in the Sydney area, then please give leakinc a call, and they will provide you with a free quote.