There are several ways to announce your arrival in a house. You can knock on the door or simply press the bell. Nowadays, the latter method is the most common. The doorbell is, therefore, one of the most classic accessories in a house. They come in two forms: wired and wireless. The wireless doorbell has its own composition and operating mode. In the event of a software problem, it often only requires a simple reset. Here is how to reset a wireless doorbell. So, without further ado, let’s dive into this blog and learn some of the things you need to know about wireless bells.

How a wireless doorbell works


The wireless doorbell is a device consisting of two units that communicate with each other wirelessly. It consists of two parts, a push button and a bell. It is sometimes necessary to call in an electrician for installation. This expert will install the push button and give you all the information on how to use it.

You can also do this yourself, as no electrical work is required. Firstly, the push button and the bell must be fitted with new batteries. Secondly, the two units must be synchronized on the radio frequency of 433.92 MHZ. The push button is installed at the entrance next to the door or gate, while the doorbell is placed in the flat within its range.

It should be noted that the doorbell should be placed in a place that is in direct communication with the entrance door without any obstacles to avoid partitions and interference. There are models of doorbells that can be plugged directly into a socket. Thirdly, a good melody should be chosen, and the volume should be adjusted so that it is audible enough.

Reset process

Sometimes a wireless doorbell may experience minor problems in its operation. This can be caused by faults or frequency interference. The first thing to do is to locate the fault, which may be hardware or software. If it is hardware, then the faulty unit should be replaced. However, if the fault is software-based, the doorbell must be reset. This will be done in five steps as follows:

  • Remove all batteries from the push button and the doorbell
  • Wait for at least 2 minutes to allow the whole system to return to neutral
  • Replace the batteries in the different units; it is advisable to change the batteries
  • Press the sync button on the doorbell for at least 5s 
  • Now press the main button on the doorbell.

The wireless bell is now reset and ready for use. This operation will be repeated as many times as necessary.

Advantages and price of a wireless doorbell


The advantages of using a wireless doorbell are many and varied. The first is undoubtedly the simplicity of its installation. Indeed, the use of a wireless doorbell does not pose any major problem to the person who adopts it. Its modernity and simplicity should be noted. It takes up very little space and costs very little.

This electrical device is very economical and can be operated with batteries. There are several types of doorbells with different prices. You should expect to pay between €15 and €20 for low-end models, between €25 and €45 for standard models and around €70 for high-end models.

In conclusion, a wireless doorbell is a dull device for special use. It is relatively easy to install, but expert advice in the field may be necessary. In case of problems, especially software problems, a reset should be carried out as described above.

Sound off in the comments section below, and tell us what you want to read next and if you want to read more about installing a wireless bell.