Summary

    – What type of door does the layout of the premises allow?

    – What will your interior door be used for?

    – Does the door have to be efficient in terms of insulation?

There is a wide range of doors to choose from for interior spaces. To select the door model that best suits the layout of your home, all you have to do is ask yourself the right questions.

Here’s the bottom line in this tip.

What type of door does the layout of your home allow?

The door model chosen for your interior depends primarily on the layout of the premises and the constraints that are specific to it. Consider:

    – Clearance space (space needed to open the door): is it sufficient for a swinging door?

        ◦ If the clearance space is insufficient, opt for a swinging model: you must have sufficient clearance space in the 2 rooms.

        ◦ If it is almost zero, the best option will remain the folding door.

    – The size and nature of the neighbouring partitions:

        ◦ To install a sliding door, you need to have a long enough partition on at least one side of the door, or even both if you want to install a double model.

        ◦ In addition, it will be impossible to install a sliding door in a load-bearing wall.

How to choose your interior door?

What will your interior door be used for? Your choice must combine both architectural and usage constraints. Indeed :

    – Does the door separate two rooms that are frequently crossed?

        ◦ If so, you will need to choose the most uncomplicated door to use, the one that opens the easiest: the folding door, for example, is therefore not recommended unless you leave it folded.

        ◦ In the opposite case, you can choose between all models.

    – Does the habitat accommodate a person with reduced mobility?

Does the door have to be efficient in terms of insulation?

 If yes, the constraints of daily usage are essential. Also, you will need to choose an automatic sliding or swinging door to facilitate movement.

Good to know: do not forget to weigh the maintenance constraints in your choice. Very aesthetic, traditional or sliding glass doors require a lot of maintenance. If they are located in a high-traffic area, you can be sure that they will quickly lose their transparency!

Depending on the room where you plan to install your door, you will need more or less sound and heat insulation. For example:

    – Between 2 rooms, the performance in terms of sound insulation is essential.

    Thermal insulation performance is more critical between two rooms with different temperatures.

This criterion will help you determine the suitable door model:

    Swing and pivot doors have good insulating qualities, regardless of their material. Of course, you can choose a more or less sound- and heat-insulating material to adapt the door to your needs.

    – Sliding doors, especially those with sliding panels, have poor soundproofing qualities. If this is not a criterion of choice for you, you should know that the thermal insulation can be satisfactory depending on the materials used.

    – Due to the relatively slim choice of materials, folding doors are not always very efficient in sound and heat insulation.

If you want to enhance your decor and add value to your home with custom window and door options, you will hit the correct address at P.C.L. Interior and Exterior Finishes Inc. in G.T.A. 

I hope you have enjoyed reading this post. Remember to share your opinion in the comment section below.